HIKVISION iDS-TCM403-A Configuration Manual

Capture Interval
Select Time, and set Interval (the me between the adjacent captures).
Capture Pictures
The number of captured picture(s).
8.
Link supplement light(s) to the specic lane(s). Refer to Set Supplement Light Linkage for details.
9.
Oponal: Check the other external input channel(s) to copy the same sengs.
10.
Draw lane lines.
1) Click Draw Lane Line.
2) Select the default lane line and right border line, and drag the two end points of the line or
drag the whole line to adjust its
posion according to the actual scene.
3) Click OK.
Figure 1-2 Draw Lane Line
11.
Click Save.
Network Trac Camera Conguraon Manual
3

HIKVISION iDS-TCM403-A Specifications

General

Brand	HIKVISION
Model	iDS-TCM403-A
Category	Security Camera
Language	English