Chapter 3 View Real-Time Picture
You can view the real-me captured pictures and license plate informaon.
Steps
1.
Go to Live View → Real-Time Capture .
2.
Select an item from the list, and you can view the capture scene picture and license plate
picture.
Figure 3-1 Real-Time Picture
3.
Oponal: You can also do the following operaons.
/
/
●
Level 1 Arming can only connect one client or web. The uploaded pictures
will not be stored in the storage card. The pictures in the storage card will be
uploaded to the level 1 arming.
●
Level 2 Arming can connect three clients or webs. The pictures will be
uploaded to the client/web, and stored in the storage card.
●
Disarming is to cancel the alarm status or real-me picture.
/ Click to measure the license plate pixel.
Click to enable manual capture.
Click to set connuous capture parameters and the device will capture pictures
according to the set interval.
Capture Times
Up to ve pictures can be captured per connuous capture.
Interval
Up to four intervals can be set, and the default interval is 100 ms.
Network Trac Camera Conguraon Manual
49
To Next Page
Loading...
Need help?
General
