HIKVISION iDS-TCM403-A Configuration Manual

Set Helmet Detecon Sensivity. It will capture when the amount of people who are not
wearing helmets reaches the set value. If there are 2 or above people in the vehicle, it will
not capture when the amount of people who are not wearing helmets is less than the set
value. If there is only one person in the vehicle and he/she is not wearing a helmet, it will
capture.
3.
Select Steering Wheel
Locaon according to the actual condion.
4.
Click Save.
1.6.9 Set Image Encoding Parameters
If the captured pictures are not clear, set the resoluon of the captured pictures and the picture
size.
Steps
1.
Go to
Conguraon → Capture → Capture Parameters → Picture Encoding and Composion →
Image Encoding .
Figure 1-25 Set Image Encoding Parameters
2.
Select Capture Resoluon.
3.
Enter the picture size.
JPEG Picture Size
The size of the compressed captured picture. The actual size is related to the scene
complexity.
Composite Picture Size
The size of the compressed composite picture. The actual size is related to the scene
complexity.
Note
Only the device supporng picture composion supports composite picture size sengs. The
actual device prevails.
4.
Click Save.
1.7 Set Barrier Gate Linkage
If a barrier gate has been connected to the device, you can link barrier gate to realize the control
and management of the vehicles at the entrance or exit.
Network Trac Camera Conguraon Manual
42

HIKVISION iDS-TCM403-A Specifications

General

Brand	HIKVISION
Model	iDS-TCM403-A
Category	Security Camera
Language	English