HIKVISION iDS-TCM403-A Configuration Manual

1.1.2 Set RS-485 Radar
Set RS-485 radar if RS-485 signal (speed detecon or capture via radar) is connected, and capture is
triggered by radar. In this mode, the
informaon including the vehicle speed, vehicle passing me,
vehicle overview, license plate number, license plate color, vehicle color, the facial features of the
driver and the front passenger, etc. will be recorded.
Before You Start
●
Install the radar.
●
Connect the D+ and D- of the radar RS-485 interface to the D+ and D- of the device RS-485
interface.
Steps
1.
Go to
Conguraon → Capture → Applicaon Mode .
2.
Select Applicaon Mode as RS-485 Radar.
Network Trac Camera Conguraon Manual
4

HIKVISION iDS-TCM403-A Specifications

General

Brand	HIKVISION
Model	iDS-TCM403-A
Category	Security Camera
Language	English