HIKVISION iDS-TCM403-A Configuration Manual

Figure 1-14 Set Captured Image Parameters
2.
Set the captured image parameters.
Brightness
It refers to the max. brightness of the image.
Contrast
It refers to the contrast of the image. Set it to adjust the levels and permeability of the image.
Shuer
If the shuer speed is quick, the details of the moving objects can be displayed beer. If the
shuer speed is slow, the outline of the moving objects will be fuzzy and trailing will appear.
Gain
It refers to the upper limit value of liming image signal amplicaon. It is recommended to
set a high gain if the illuminaon is not enough, and set a low gain if the illuminaon is
enough.
Dayme Brightness Enhancement
It refers to the brightness of the image in the dayme. Higher value stands for brighter image.
Window Enhancement
In front light or back light scene, the ash light may not pass through the vehicle window, or
the image eect of the window is bad caused by the light. In this condion, you can check
Window Enhancement. The higher the Brightness Enhancement Level is, the brighter the
window image is. The higher the Defog Level is, the
beer the permeability of the window
image is.
White Balance Level
It is the white
rendion funcon of the device used to adjust the color temperature according
to the environment.
Network Trac Camera Conguraon Manual
30

HIKVISION iDS-TCM403-A Specifications

General

Brand	HIKVISION
Model	iDS-TCM403-A
Category	Security Camera
Language	English