7
Shortcuts Instructions
1.4
EPG
It provides convenience to check TV programs that will be available in the next 7 days. The information displayed by
the EPG is made available by the commercial television networks for digital channels only. The EPG also provides
a simple way to program the recording of your favorite programs and a reminder function which can switch channel
automatically at scheduled time so that you do not miss programs of interest. (The availability and amount of
programme information will vary, depending on the particular broadcaster).
Watch
When a current program is selected, press the [OK] button to watch it in full screen
mode.
PVR/Reminder
Press the [ / ] buttons to select the channels. Press the [<
/ >] buttons to select program based on the time schedule.
Press the [OK] button on the remote control to select PVR
or Reminder
.
Press the [ / ] buttons to change and set a different options.
· Select and set Start time/Stop time:
Press the [< / >] buttons to move to the position you
want to set and then press the [0~9] buttons to input
the desired numbers.
· Repeat: You can select from Once, Everyday and
Weekly.
NOTES
Reminder is only available for programmes that haven’t been aired yet.
A storage device must be attached to the television for recording purposes.
The TV will record the program even in standby mode.
Page Up/Down
Press the [
CH+/CH-
] buttons to move programme listing page up/down.
Schedule
Press the [RED] button to view a list of scheduled reminders and recordings.
Day
Press the [GREEN] button to select a day.
CH.List
Press the [YELLOW] button on the remote control jump to the Channel List Selection
right away.
Program
Details
Press the [BLUE] button to display detailed information of the selected program.
Press the [EPG] button on the remote control to display channel information on program guide list.
1 DT2-43_1080i
NBA 2013-2014-Mittagsjournal
13:00-14:00 26 Oct.
Type: PVR
PVR Reminder
To Next Page
Loading...
Need help?
General