Hitachi C 10FCH2 Technical Data And Service Manual

--- 7 ---
7. PRECAUTIONS IN SALES PROMOTION
In the interest of promoting the safest and most efficient use of the Models C 10FCH2 and C 10FCE2 Compound
Saws by all of our customers, it is very important that at the time of sale the salesperson carefully ensures that the
buyer seriously recognizes the importance of the contents of the Instruction Manual, and fully understands the
meaning of the precautions listed on the Warning Labels and Caution Labels attached to each machine.
7-1. Instruction Manual
Although every effort is made in each step of design, manufacture and inspection to provide protection against
safety hazards, the dangers inherent in the use of any compound saw cannot be completely eliminated.
Accordingly, general precautions and suggestions for the use of electric power tools, and specific precautions and
suggestions for the use of the compound saw are listed in the Instruction Manual to enhance the safe, efficient
use of the tool by the customer. Salespersons must be thoroughly familiar with the contents of the Instruction
Manual to be able to offer appropriate guidance to the customer during sales promotion.
7-2. Warning Labels and Caution Labels
(1) Precautions on the name plate
Each Model C 10FCH2/FCE2 is furnished with a Name Plate that lists the following precautions.
Fig. 3-1
Fig. 3-2
Fig. 3-3
Instruct the customer to thoroughly read the Instruction Manual prior to attempting to operate the machine.
USA/CAN
Europe
AUS/NZL/China/Asia

Hitachi C 10FCH2 Specifications

General

Input power	1520 W
Power source	AC
Blade bore	30 mm
Blade diameter	255 mm
Idle speed (max)	5000 RPM
Sound power level	95 dB
Bevel setting (left)	45 °
Miter setting (left)	52 °
Sound pressure level	108 dB
Cutting capacity 45° miter	40 x 102 mm

Weight and Dimensions

Depth	628 mm
Width	460 mm
Height	561 mm
Weight	12000 g