Hitachi C 10FCH2 Technical Data And Service Manual

--- 3 ---
(5) Large table for increased material stability
The turn table is as large as that of the Model C 10FCH.
C 10FCH2/C 10FCE2
C 10FCH/C 10FCE
Outside diameter of turn table (mm)
280
280
Table 1
(6) Powerful 15 amps motor (for U.S.A. and Canada)
The Models C 10FCH2 and C 10FCE2 are equipped with a 15-ampere motor. The Models C 10FCH2 and
C 10FCE2 can cut workpieces as quickly as the Model C 10FCH.
(7) Thumb actuated positive stops for quick and easy miter adjustment
The positive stops are provided to adjust the turn table position for miter cutting in the same manner as the
current Model C 10FCH. These stops can be also actuated (fixed or released) with thumb quickly and easily
holding the side handle.
(8) Dust guide to prevent chips from scattering
A dust guide is provided to prevent wood chips from adhering to the saw blade and scattering when cutting the
edge of the workpiece.

Hitachi C 10FCH2 Specifications

General

Input power	1520 W
Power source	AC
Blade bore	30 mm
Blade diameter	255 mm
Idle speed (max)	5000 RPM
Sound power level	95 dB
Bevel setting (left)	45 °
Miter setting (left)	52 °
Sound pressure level	108 dB
Cutting capacity 45° miter	40 x 102 mm

Weight and Dimensions

Depth	628 mm
Width	460 mm
Height	561 mm
Weight	12000 g