English
42
9. Cleaning
Periodically remove chips, dust and other waste material from the surface of the power
tool, especially from the inside of the lower guard with a damp, soapy cloth. To avoid
a malfunction of the motor, protect it from contact with oil or water.
If the laser line becomes invisible due to chips and the like adhered onto the window of
the laser marker's light-emitting section, wipe and clean the window with a dry cloth or
a soft cloth moistened with soapy water, etc.
SERVICE AND REPAIRS
All quality power tools will eventually require servicing or replacement of parts because of
wear from normal use. To assure that only authorized replacement parts will be used and
that the double insulation system will be protected, all service (other than routine
maintenance) must be performed by an AUTHORIZED HITACHI POWER TOOL REPAIR
CENTER ONLY.
NOTE: Specifications are subject to change without any obligation on the part of HITACHI.
To Next Page
Loading...
Need help?
General
