Manually editing channels
To skip a channel:
1 Make sure that you have Auto Scanned for
channels.
2 Press MENU on the remote control, then
press 4/_ to highlight Channel. The
Channel menu opens.
Channel
TV Source Cable
Auto Scan J_
Favorites
List
Channel No. 1-2
Channel Label Sencore
DTV Signal Strong
3
4
Press V to enter the Channel menu.
Press A/V to select List, then press
_. The List sub-menu opens.
5 Press A/Y to select a channel you want to
skip, then press OK. The check mark next to
channel disappears and the screen turns
black.
6 Press OK again to show the channel.
The check mark appears, and the screen
shows the channel.
Viewing channel information
To view channel information:
1 In digital TV mode, select a channel you want
to watch.
2 Press INFO once to display information about
the channel.
3 Press INFO again to display information about
the program content (if available).
Adding favorite channels
To add channels to the favorite channel list:
1 Press MENU on the remote control, then
press 4/_" to highlight Channel. The
Channel menu opens.
Channel
TV Source Cable
Auto Scan J_
Favorites J_
List J_
Channel No. 1-2
Channel Label Sencore
DTV Signal _ Strong
2 Press V to enter the Channel menu.
3 Press A/Y to select Favorites, then press
I_. The Favorites sub-menu opens.
Channel
4
5
6
To
1
2
Press A/Y to select a channel that you want
to add to the favorite channel list.
Press OK. A check mark appears next to
the channel, and the channel is marked as a
favorite.
Repeat this procedure to select the other
channels.
select your favorite channel:
Press FAV OH one or more times on the
remote control until the Favorite List appears
on the screen.
Press A/Y to select the preset for your
favorite channel.
Note
The favorite channel function does not work until
you have programmed your favorite channels.
14
4 Press INFO again to close.
To Next Page
Loading...
Need help?
General
