User can use the device simply as an air circulator.
Press the MODE selector button so that the display indicates
(ON/OFF) button. Fan operation starts with a beep.
Press the button again to stop operation.
Press the (FAN SPEED) button.
• Select the OFF TIME by pressing the
• Setting time will change according to the below
sequence when you press the button.
ON Timer and OFF Timer are available.
• Select the ON TIME by pressing the Button.
• Setting time will change according to the below
sequence when you press the button.
Operation stop at setting time
Operation will start for setting
temperature at setting time.
• During POWERFUL operation, cooler or warmer air will be blown out from indoor unit for COOLING or
HEATING operation respectively.
• During POWERFUL operation, capacity of the air conditioner will not increase
– if the air conditioner is already running at maximum capacity.
– just before defrost operation (when the air conditioner is running in HEATING operation).
• After auto restart, POWERFUL operation is cancelled and previous operation shall start.
Press the (POWERFUL) button during operation.
" is displayed on the LCD.
" is displayed on the LCD.
POWERFUL operation ends in 20 minutes. Then the system
automatically operates with the previous settings used before
Press the (POWERFUL) button again.
" disappears from the LCD.
" disappears from the LCD.
Press the (ON/OFF) button. or
Press the (ON/OFF) button. or
Press the (ON/OFF) button. or
• When ECO mode, or LEAVE HOME mode is selected, POWERFUL operation is cancelled.
• During Leave Home operation, fan speed and horizontal air defl ector position cannot be changed.
Prevent the room temperature from falling too much when no one is at home .The initial setting
and the temperature range can be set between 10
Press (LEAVE HOME) button during stop or
Room temperature is set at 10
buttons.Temperature range can be set between 10
• " ", " ", " ", "SET TEMPERATURE" is
Change to other Operation Mode.
operation, the air conditioner performs at maximum power.
(POWERFUL) button during HEATING, DEHUMIDIFYING, COOLING, FAN, AUTOMATIC
(POWERFUL) button during HEATING, DEHUMIDIFYING, COOLING, FAN, AUTOMATIC
(POWERFUL) button during HEATING, DEHUMIDIFYING, COOLING, FAN, AUTOMATIC
(POWERFUL) button during HEATING, DEHUMIDIFYING, COOLING, FAN, AUTOMATIC
(POWERFUL) button during HEATING, DEHUMIDIFYING, COOLING, FAN, AUTOMATIC
(POWERFUL) button during HEATING, DEHUMIDIFYING, COOLING, FAN, AUTOMATIC
(POWERFUL) button during HEATING, DEHUMIDIFYING, COOLING, FAN, AUTOMATIC
(POWERFUL) button during HEATING, DEHUMIDIFYING, COOLING, FAN, AUTOMATIC
(POWERFUL) button during HEATING, DEHUMIDIFYING, COOLING, FAN, AUTOMATIC
(POWERFUL) button during HEATING, DEHUMIDIFYING, COOLING, FAN, AUTOMATIC
(POWERFUL) button during HEATING, DEHUMIDIFYING, COOLING, FAN, AUTOMATIC
(POWERFUL) button during HEATING, DEHUMIDIFYING, COOLING, FAN, AUTOMATIC
(POWERFUL) button during HEATING, DEHUMIDIFYING, COOLING, FAN, AUTOMATIC
(POWERFUL) button during HEATING, DEHUMIDIFYING, COOLING, FAN, AUTOMATIC
(POWERFUL) button during HEATING, DEHUMIDIFYING, COOLING, FAN, AUTOMATIC
(POWERFUL) button during HEATING, DEHUMIDIFYING, COOLING, FAN, AUTOMATIC
(POWERFUL) button during HEATING, DEHUMIDIFYING, COOLING, FAN, AUTOMATIC
(POWERFUL) button during HEATING, DEHUMIDIFYING, COOLING, FAN, AUTOMATIC
(POWERFUL) button during HEATING, DEHUMIDIFYING, COOLING, FAN, AUTOMATIC
(POWERFUL) button during HEATING, DEHUMIDIFYING, COOLING, FAN, AUTOMATIC
(POWERFUL) button during HEATING, DEHUMIDIFYING, COOLING, FAN, AUTOMATIC
(POWERFUL) button during HEATING, DEHUMIDIFYING, COOLING, FAN, AUTOMATIC
(POWERFUL) button during HEATING, DEHUMIDIFYING, COOLING, FAN, AUTOMATIC
(POWERFUL) button during HEATING, DEHUMIDIFYING, COOLING, FAN, AUTOMATIC
(POWERFUL) button during HEATING, DEHUMIDIFYING, COOLING, FAN, AUTOMATIC
(POWERFUL) button during HEATING, DEHUMIDIFYING, COOLING, FAN, AUTOMATIC
(POWERFUL) button during HEATING, DEHUMIDIFYING, COOLING, FAN, AUTOMATIC
For multi model connections, POWERFUL operation may not function depending on operation conditions.