Version 1.0, 12/2022. Copyright 2012 Hitron Technologies
18
Version 1.0, 12/2022. Copyright 2022 Hitron Technologies
18
Hitron CODA-57/57-EU User’s Guide
Figure 5: GUI Overview
1.7 Resetting the CODA-57/57-EU
When you reset the CODA-57/57-EU to its factory defaults, all user-configured
settings are lost, and the CODA-57/57-EU is returned to its initial configuration state.
To reset the CODA-57/57-EU, press and hold the RESET button for three seconds.
The CODA-57/57-EU turns off and on again, using its factory default settings.
NOTE: Depending on your CODA-57/57-EU’s previous configuration, you may need
to re-configure your computer’s IP settings; see IP Address Setup on page
15.
Table 4: GUI Overview
Primary
Navigation Bar
Use this section to move from one part of the GUI to another.
Main Window Use this section to read information about your CODA-57/57-
EU’s configuration, and make configuration changes.