06-7
Conversion
• Remove the seat
j
and back cushions
k
.
• Lower the table.
• Replace the seat cushions and pull them to
the middle of the table.
• Fill the empty spaces with the back cushions.
To do this, turn the back cushions
k
around
and lay them with the wider side against the
front or standing wall.
• In vehicles with a width of 2.5 m, an additional
cushion
l
should be placed vertically into
the gap to ll the remaining space.
6.5 Conversion of seats and beds
The seat groups can be converted into comfor-
table beds.
Ensure that the tabletop, seat chests
and/or covers as well as cushions
are well secured so that nothing falls.
1
1
3
2
Rear cross-
wise seat
right seat
left seat
right backrest
left backrest
To Next Page
Loading...
Need help?
General
