06-10
6.8 Roof bonnets
Large roof bonnet
To open the roof bonnet
Before opening the bonnet, ensure that the area
above the opening of the bonnet is free. The
bonnet can be opened to an angle of 60°.
• Reach into the opening of the crank bag and
fold the crank to the user position by pulling
it out. Turn the crank clockwise to open the
bonnet to the desired position. When you
have reached the maximum opening angle
you will feel the resistance.
To close the roof bonnet
• Turn the crank counter-clockwise until the
bonnet is closed and you feel the resistance.
When the bonnet is closed, you can fold the
crank back into the crank bag. To be locked
securely, the crank must be folded into the
crank bag.
Safety instructions
• Never open the roof bonnets in a
strong wind or when it is raining,
hailing, etc., or if the outside tem-
perature is below -20° C!
• Never use force to open the roof
bonnets if they are frozen or cove-
red with snow, because you may
break the hinges and the opening
mechanism.
• Before opening, remove snow,
ice or heavy dirt. Make a note of
the required space needed before
opening the roof bonnet under a
tree, in a garage, etc.
• Do not step on the roof bonnet.
• Close and lock roof bonnets be-
fore driving. Open insect screen
and shade (home position).
• Close shade only 3/4 of the way if
the sun shines in strongly; danger
of heat accumulation!
The openings for the forced ventilati-
on system must always be left open!
Never close or cover forced ventilati-
on systems!
To Next Page
Loading...
Need help?
General
