10-5
10.3 Electric auxiliary heating
The electric auxiliary heating (Ultrahe-
at) operates only when the camper is
connected to the 230V mains supply.
The electric auxiliary heating is integrated in the
hot-air heating system. This allows for three pos-
sible heating methods:
- just the gas heater
- gas heater + electric heater
- just the electric heater
The electric auxiliary heating allows you to heat
up the vehicle more quickly. It has three power
settings:
- 500 W
- 1000 W
- 2000 W
Before switching on the Ultraheat,
please ensure that the fuse protection
of the electrical supply at the camp-
site corresponds to the power setting
you have selected.
During operation, the reecting panel
of the heater will get very hot in some
places.
To switch on
• Set the rotary switch to the desired power set-
ting (green indicator light will light up during
„Operation“).
• Set the desired room temperature using the
rotary switch.
To switch off
• Use the rotary switch to turn off the heater.
To distribute hot air evenly and quic-
kly and ensure that the surface tem-
perature on the heater is reduced, the
heater should be operated only when
the circulation fan has been switched
on.
Ultraheat
To Next Page
Loading...
Need help?
General
