OPERATION
48
AC PARALLEL OPERATION
Both types of EU2200i generators (Standard and Companion) can be connected
to each other to increase the available power using a parallel cable kit (optional
equipment, see page 83).
Before connecting an appliance to either generator, make sure that the
appliance is in good working order and that its electrical rating does not exceed
that of the receptacle.
Most motorized appliances require more than their electrical rating for startup.
When an electric motor is started, the overload alarm indicator (red) may come
ON. This is normal if the overload alarm indicator (red) goes OFF within 4
seconds. If the overload alarm indicator (red) stays ON, consult an authorized
Honda Power Equipment dealer.
During parallel operation, the Eco Throttle switch should be in the same
position on both generators.
1. Connect the parallel operation cable between the EU2200i to either an
EU2200i Companion or another EU2200i generator following the instructions
supplied with the cable kit.
2. Start the engines (see page 39) and make sure the output indicator (green) on
each generator comes ON (see page 45).
PARALLEL OPTION CABLES KIT
(EU2200i and EU2200i Companion)
To Next Page
Loading...
Need help?
General
