OPERATION
50
Parallel operation with EU2000i
For instructions on how to connect the parallel operation cable, refer to
pages 48 and 49.
An EU2200i generator may only be connected to EU2000i or EU2000i
Companion generators that have specific frame serial numbers. Refer to the
table below to confirm that your EU2000i or EU2000i Companion generator is
compatible with an EU2200i.
AC Parallel Operation Applications
Follow the instructions included with the parallel operation cable kit.
Before connecting an appliance or power cord to the generator:
• Make sure that it is in good working order. A faulty appliance or power cord
can create a potential for electrical shock.
• If an appliance begins to operate abnormally, becomes sluggish, or stops
suddenly, turn it off immediately. Disconnect the appliance, and determine
whether the problem is the appliance or the rated load capacity of the
generator has been exceeded.
• Never connect other than the specified generator models (see page 8).
• For parallel operation, use only a Honda approved parallel operation cable
(optional equipment).
• Never connect or remove the parallel operation cable when the generator is
running.
• For single generator operation, the parallel operation cable must be
removed.
Models Frame Serial Number Range
EU2000i / EU2000i Companion EAAJ-2017305 and later
EACT-1000001 and later
To Next Page
Loading...
Need help?
General
