18
INITIAL USE INSTRUCTIONS
ENGINE OIL
The generator is shipped WITHOUT OIL in the engine.
1. Place the generator on a level
surface.
2. Open the right maintenance cover
by turning its latch
counterclockwise.
3. Remove the oil filler cap by turning
it counterclockwise.
4. Add enough oil to bring the oil level to the upper limit of the oil filler neck.
SAE10W-30 API service category SJ or later (or equivalent) is recommended
for general use; for additional recommendations (see page 19).
Maximum oil capacity: 1.2 US qt (1.1 L)
Do not overfill the engine with oil. If the engine is overfilled, the excess oil
may be transferred to the air cleaner housing and air filter.
5. Reinstall the oil filler cap securely.
6. Close the right maintenance cover by turning its latch clockwise.
RIGHT MAINTENANCE COVER
LATCH
OIL FILLER CAP
OIL FILLER NECK
UPPER LIMIT
(The oil exists to the
oil filler neck.)
31Z376200.book 18 ページ ２０２０年２月１４日 金曜日 午前１０時３９分
To Next Page
Loading...
Need help?
General
