STORAGE
90
Engine Oil
Change the engine oil (see page 76).
Engine Cylinder
1. Remove the spark plug (see page 79).
2. Pour a teaspoon (5 cc) of clean engine oil into the cylinder.
3. Pull the starter rope several times to distribute the oil in the cylinder.
4. Reinstall the spark plug (see page 79).
5. Slowly pull the starter grip until resistance is felt. At this point, the piston is
coming up on its compression stroke and both the intake and exhaust valves
are closed. Storing the engine in this position will help to protect it from
internal corrosion. Return the starter grip gently.
Battery
Charge the battery before storing the generator (see page 85).
31Z376200.book 90 ページ ２０２０年２月１４日 金曜日 午前１０時３９分
To Next Page
Loading...
Need help?
General
