Cruise Control
Junction Box 1......"
••
'
...
4\
----------------------
Assembly/Installation
COIIITR()L ARM
~~~
RETURN SPRING
faces of the control
arm
and shaft with
contaminants
aw.ay
from box
luu'fac:Alt_ Clean parts with solvent before
CAUTION:
Hook the
ends of the return the case and
arm
with the control
arm
in
the six o'clock
lion.
Rotate the control arm counterclockwise to the
twelve o'clock
and
it back into the JunctlCln
box ass,emblv.
Coat
the
grease.
CONTROL ARM
WASHER
/
@b
\
CIRCUP
on the drum shaft. In-
out. Be sure
groove.
Install the washer and
a new
stall the with the
the
is seated all the way around the
Connect
the throttle cables to the box. Coat the
faces of the cable drum and drum shaft with
grease.
NOTE: install the cable drum with the the
inside. Connect
the cables to the cable drum with the
stopp~~r
c,ontaciting the control
arm.
Insert the ends of the throttle cables into the slots in the
cable drum. Install the cable drum in the case.
Install the
;,
In,di..-,n
box on the bracket.
page i
lock nut.
the cable
the throttle cables
Recheck the throttle
Grless,e
the end
of
the actuator cable and connect the
cable
end to the control arm.
To Next Page
Loading...
Need help?
General
