Honda HR214 User Manual

Drive Clutch Lever (Self-propelled type)
To propel the mower, push the drive clutch lever
forward and hold it against the handlebar. Release
the lever to disengage the drive.
To propel the mower and operate the cutting blade
simultaneously, push the button on top of the
ROTO-STOP lever and push the ROTO-STOP lever
forward, then push the drive lever forward; the drive
clutch lever will hold the ROTO-STOP lever forward,
as shown.
When the drive clutch lever is used to hold the
ROTO-STOP forward, releasing the drive clutch lever
automatically releases the ROTO-STOP lever.
Shift Lever (Self-propelled type)
Move the shift lever to select slow or fast drive speed.
Position 1: Slow, 0.8 m/set (2.6 ft/sec)
Position 2: Fast, 1.2 m/set (3.9 ft/sec)
ROTO-STQP LEVER
/
SHIFT LEVER
I
10

Honda HR214 Specifications

General

Cutting Width	21 inches
Cutting Height Range	1 to 3 inches
Grass Bag Capacity	2.5 bushels
Deck Material	Steel
Blade Type	Single blade
Starter System	Recoil
Engine Type	4-stroke, single cylinder, air-cooled
Drive Type	Self-propelled
Fuel Capacity	0.5 gallons
Fuel Tank Capacity	0.5 gallons
Mulching Capability	Yes
Oil Capacity	0.6 quarts
Engine	Honda GCV160