Honda HR214 User Manual

Spark Arrester Maintenance (Optional Part)
If the mower has been running, the muffler will be
very hot. Allow it to cool before proceeding.
I. Remove the two 6mm nuts and remove the muffler
protector, identification plate, muffler and gasket.
2. Remove the spark arrester from the muffler.
(Taking care not to damage the wire mesh.)
3. Check for carbon deposits around the exhaust port
and the spark arrester, and clean if necessary.
4. Install spark arrester in the muffler.
5. Install gasket, muffler, identification plate, muffler
protector and then tighten the two 6 mm nuts
securely.
(Optional part)
SPARK ARRESTER
(Optional part)
MUFFLER
6 mm NUT
MUFFLER
GASKET
\GAsKET
(ODtional part)
35

Honda HR214 Specifications

General

Brand	Honda
Model	HR214
Category	Lawn Mower
Language	English