Honda HR214 User Manual

Preparation for Storage
The following steps should be taken to protect the
mower ‘whcncvcr it will be stored for longer than 30
days.
1. Drain the fuel tank and carburetor into a suitable
gasoline container:
A. Disconnect the fuel tube from the carburetor
and drain the fuel tank.
B. Loosen the carburetor drain bolt to drain the
carburetor.
C. Retighten the drain bolt, connect the fuel tube
and turn the fuel valve OFF.
-
* Gasoline is extremely flammable and explosive
under certain conditions. Do not smoke or allow
flames or sparks in the area.
2. Change the engine oil (p. 27).
NOTE:
If the mower will be stored for longer than 3 months,
remove the spark plug and pour three tablespoonsful
of clean motor oil into the cylinder. Pull the starter
rope slowly two or three times to distribute the oil.
Replace the plug.
CYLINDER /
23

Honda HR214 Specifications

General

Cutting Width	21 inches
Cutting Height Range	1 to 3 inches
Grass Bag Capacity	2.5 bushels
Deck Material	Steel
Blade Type	Single blade
Starter System	Recoil
Engine Type	4-stroke, single cylinder, air-cooled
Drive Type	Self-propelled
Fuel Capacity	0.5 gallons
Fuel Tank Capacity	0.5 gallons
Mulching Capability	Yes
Oil Capacity	0.6 quarts
Engine	Honda GCV160