19
UPPER LIMIT
LOWER LIMIT
Engine Oil Level
Check the engine oil level with the engine stopped and the mower on a
level surface.
1. Remove the oil filler cap, and wipe the dipstick clean.
2. Insert and remove the dipstick without screwing it into the filler neck.
Check the oil level shown on the dipstick.
3. If the oil level is low, add the recommended oil (see page 48) to reach
the upper limit mark on the dipstick. Do not overfill.
4. After checking the engine oil level, screw in the oil filler cap/dipstick
securely.
OIL FILLER CAP/DIPSTICK
To Next Page
Loading...
Need help?
General
