STORAGE PRECAUTIONS
If your mower will be stored with gasoline in the fuel tank and carburetor, it
is important to reduce the hazard of gasoline vapor ignition. Select a well-
ventilated storage area away from any appliance that operates with a
flame, such as a furnace, water heater, or clothes dryer. Also avoid any
area with a spark-producing electric motor, or where power tools are oper-
ated.
If possible, avoid storage areas with high humidity, because that promotes
rust and corrosion.
Unless all fuel has been drained from the fuel tank, turn the fuel valve to the
OFF position to reduce the possibility of fuel leakage.
Place the mower with its wheels on a level surface. Tilting can cause fuel or
oil leakage.
The handlebar can be folded for compact storage (see page 42).
With the engine and exhaust system cool, cover the mower to keep out
dust. A hot engine and exhaust system can ignite or melt some materials.
Do not use plastic sheet as a dust cover. A nonporous cover will trap mois-
ture around the mower, promoting rust and corrosion.
If the cylinder was coated with oil during storage preparation, the engine
will smoke briefly at startup. This is normal.
43
To Next Page
Loading...
Need help?
General
