Honda HRJ216 User Manual

23
Cutting Height
Check the cutter housing cutting height settings. The lowest setting is
approximately 16 mm and the highest setting is 76 mm. To adjust cutting
height, pull the adjustment lever toward the wheel, and move it into another
notch.
If you are not sure what cutting height to select, start with a high setting and
check the appearance of the lawn after mowing a small area. Then readjust
cutting height if necessary.
LOWER
RAISE
RAISE
LOWER
ADJUSTMENT
LEVER

Honda HRJ216 Specifications

General

Brand	Honda
Model	HRJ216
Category	Lawn Mower
Language	English