27
6. OPERATION - continued
OPERATING THE CONTROLS FOR MOWING
Throttle Lever
For best cut quality, always mow with the throttle lever in the HIGH position.
When the blades rotate at the preset fast speed, it creates a strong fan action
that lifts and cuts grass more efficiently. Do not try to increase the preset
engine speed, the blades could fracture and come apart and engine life will be
shortened.
When you need to leave the mower for any reason, always turn the engine
OFF by moving the throttle lever to the STOP position or by releasing the Blade
Control Lever if your model is fitted with Fly Wheel Brake.
Blade Control Lever ( HRU196M1 and all 21” Models )
To prevent stalling, always put the throttle lever in the fast position before
engaging the blade control lever.
To start blade rotation, press the button on top of the blade control lever,
then push the lever forward quickly and hold it against the handlebar.
All other models – There is no Button to press, simply engage the lever.
Release the blade control lever to stop the blades.
NOTE: On Models equipped with Fly Wheel Brake, the Engine will stop when
you release the lever.
Operate the blade control lever with a quick and complete motion, so the
blade control is always either fully engaged or stopped. This will help to
prevent stalling the engine, and will also extend the service life of the blade
control mechanism.
To Next Page
Loading...
Need help?
General
