51
8. MAINTENANCE - continued
BLADE REMOVAL AND INSTALLATION
If you have removed the blade assembly, always use a torque wrench to
reinstall. Wear heavy gloves to protect your hands. To avoid weakening the
blades or cause imbalance or poor cutting, the blades should be sharpened by
trained staff at an authorised Honda servicing dealer. If you are replacing the
blades, use Honda genuine replacement blades or equivalent.
Removal:
1. Turn the fuel valve to the OFF
position.
2. Disconnect the spark plug cap, and
tilt the mower to the right side, so
the carburettor side is facing up.
3. Hold the blade disc firmly by
inserting a suitable screwdriver
through the blade disc to prevent
it from turning when removing the
blade disc holder bolt.
To Next Page
Loading...
Need help?
General
