44
Top-Mount Type
OPERATION
EMERGENCY STOP
SWITCH
SWITCH CLIP LANYARD
TAKING CARE OF
UNEXPECTED PROBLEMS,
If the indicators show any
abnormal condition, immediately
stop the engine and determine the
cause of the problem. Refer to
p.
.
During the warm-up period, check
the oil pressure indicator (p. ),
overheating indicator (p. ), and
cooling system indicator (p. ).
The engine will not start or run,
unless the clip is in the switch.
The emergency stop switch clip
and lanyard system is a safety
device that will stop the engine if
you fall away from the controls
while operating the boat.
Always attach the lanyard to your
PFD, or to your wrist, before
starting the engine.
Put the emergency stop switch clip
in the emergency stop switch, and
attach the lanyard to your PFD
(Personal Flotation Device) or to
your wrist, as shown.
If the fast idle control was used to
warm up the engine, gradually
return the control lever to the N
(neutral) position as the engine
warms up.
1.
5.
30
30
31
85
02/07/23 13:07:27 31ZW5601_045
To Next Page
Loading...
Need help?
General
