Honda PCX125 User Manual

+
19/1./l, ,.,27,56
+
6. Make SUfe the plug washer is in good
condition.
7. With the plug washer allached, thread
the spark plug in by hand to prevent
cross-threading.
8. Tighten the spark plug:
• If the old plug is good:
1/8 turn after it seats .
• If installing a new plug, tighten it twice
to prevent loosening:
a) First, tighten the plug:
NGK: 1/2 turn after it seats.
b)Thenloosen the
plug.
c) Next, tighten the plug again:
1/8 turn after it seats.
I'"NC:::O::::TI:::CE"'I
An improperly tightened spark plug can
damage the engine. If a plug is too loose, a
piston may be damaged. If a plug is too tight,
the threads may be damaged.
9. Reinstall the spark plug cap. Take care to
avoid pinching any cables or wires.
to. Install the removed parts in the reverse
order of removal.
101
+
+
I I.
Provided by http://www.hondapcx.org

Honda PCX125 Specifications

General

Fuel System	PGM-FI electronic fuel injection
Seat Height	764 mm
Starter	Electric
Wheelbase	1, 315 mm
Transmission	Automatic
Front Suspension	Telescopic fork
Front Brake	Single disc
Rear Brake	Drum
Engine Type	Single-cylinder, liquid-cooled, 4-stroke