Honda PCX125 User Manual

~J
19/10/13 10.22.48
+
II
Idling Stop System Operating
Conditions
Followings are requirements for the Idling
Stop system to operate properly.
Before riding
• Put the side stand up.
• Warm
up the engine. Idling Stop system
does not operate,
if the engine is not
warmed
up.
• Push the Idling Stop switch to the
"IDLING STOP",
• Ride
the scooier at proper riding position.
Idling Stop system is designed not to
work when
no load on the seaL
I~ide the scooter at speed above 10 km/h (6
mph), to enable the Idling Stop system
under above conditions.
After
Stopping
• Close
the throllie completely, Engine will
not stop
if the throllie is little opened.
• Stop
the scooter completely, Engine will
not stop
if the speed is not at 0 km/h (0
mph),
51
II
+
Iii
Provided by http://www.hondapcx.org

Honda PCX125 Specifications

General

Brand	Honda
Model	PCX125
Category	Scooter
Language	English