(1)
(2)
(3)
ON
ON
(1) oil change indicator
(2) hourmeter/odometer/
tripmeter select button
(3) ignition switch
20
Oil Change Indicator
Instruments & Controls
Indicators & Displays
The oil change indicator ( ) appears in the display when the mileage or
operating hours on your ATV approaches the oil change interval
specified on the maintenance schedule.
Reset the indicator after each oil change.
To reset the indicator, press and hold the hourmeter/odometer/tripmeter
select button ( ) and turn the ignition switch ( ) to ON ( ) for more
than 5 seconds. The indicator message will disappear.
If the oil is changed before the oil change indicator appears, be sure to
reset the oil change indicator after changing the oil, except after the
initial oil change.
Press and hold the hourmeter/odometer/tripmeter select button and turn
the ignition switch to ON ( ) for more than 5 seconds. When the
indicator lights for 2 seconds and then turns off, the oil change indicator
is reset.
23
1
０９／０５／１１ １４：４４：３８ ３１ＨＰ４８３０ ００２９
To Next Page
Loading...
Need help?
General
