LEFT HANDLEBAR
(1)
(1) engine stop switch RUN
OFF
(TRX450ER only)
21
Engine Stop Switch
Controls & Features
Indicators & Controls
The engine stop switch ( ) is used to stop the engine in an emergency.
To operate, slide the switch to the OFF ( ) position. The switch must
be in the RUN ( ) position to start the engine, and it should normally
remain in the RUN ( ) position even when the engine is OFF.
If your ATV is stopped with the ignition switch ON ( ) and the
engine stop switch OFF ( ), the battery will discharge. Turn the
ignition switch OFF ( ) to prevent battery discharge.
1
07/04/04 11:14:31 31HP1640_030
To Next Page
Loading...
Need help?
General
