72
Parking on a Steep Incline or a Loose or Slippery Surface
Parking
Basic Operation & Riding
Look for level parking area. Make sure the ground surface is firm.
After bringing your ATV to a stop, hold the brakes while you shift
into neutral.
Set the parking brake.
Turn the ignition switch OFF ( ).
If you’re finished riding for the day, turn the fuel valve OFF.
If it is necessary to start the engine when your ATV is stopped on a
grade in gear, rock the vehicle back and forth to allow shifting the
transmission into neutral.
If you must park your ATV on a steep incline or loose or slippery
surface, use the following procedure:
While holding the brakes, set the parking brake.
Turn the ignition switch OFF ( ) and release the brakes.
If the ATV begins to move, either while sitting on it or after you
dismount, find a better parking location.
If rocks or other objects are available, you can block the wheels as
shown for additional security.
1.
2.
3.
4.
5.
1.
2.
3.
4.
07/04/04 11:20:32 31HP1640_081
To Next Page
Loading...
Need help?
General
