(TRX450ER)
(TRX450R)
55
How to Stop the Engine
Starting & Stopping the Engine
Basic Operation & Riding
Normal Engine Stop
To stop the engine, make sure the transmission is in neutral by checking
that the neutral indicator lights, and turn the ignition switch OFF ( ).
If your ATV is stopped with the engine stop switch OFF ( ) and the
ignition switch ON ( ), the battery will discharge.
To stop the engine, make sure the transmission is in neutral, and turn the
ignition switch OFF ( ).
The engine stop switch should normally remain in the RUN ( )
position even when the engine is OFF.
Emergency Engine Stop
To stop the engine in an emergency, use the engine stop switch. To
operate, slide the switch to the OFF ( ) position.
07/04/04 11:18:38 31HP1640_064
To Next Page
Loading...
Need help?
General
