To Next Page

To Previous Page

CM737

User instruction

1.5 Setting the date

1. Press the DATE/DAY button to begin setting the date. When

you set the date for the first time after the batteries are inserted,

the display will show:

Press the or buttons to set the current day of the

month (e.g. d 01 = 1st day of the month) then press the green

button to confirm.

2. Press the or buttons to set the current month of the

year (e.g. m 01 = January) then press the green button to

confirm.

3. Press the or buttons to set the current year (e.g. yr.

06 = 2006) then press the green button to confirm.

The date is now stored.

1.6 Setting the time

1. Press either of the or buttons once to enter time

setting mode. The LCD screen flashes the time digits, when the

unit is powered for the first time the display shows 12:00

2. Use the or button to set the correct time then press the green button to confirm.

Each press on the buttons will change the time by one minute and holding them down will change the

time slowly at first and get progressively quicker.

Note: If this mode is entered accidentally then press the AUTO, MAN or OFF buttons to exit.

Honeywell CM737 User Manual

Other manuals for Honeywell CM737