Chapter 7: Configuring Terminal
66
User Guide for ScanPal50 Series Terminal
3. To quickly connect to a network via WLAN Protected Access (WPS), tap
. To
search the network outside of the list, slide to the end of the list and tap Add network
and enter the network name.
4. Tap on a network name to view its details.
If the network is secure, a form will pop up asking you to fill in the necessary information
(for example: certificate name, password or other credentials). To connect to a secure
network, enter the required information, and then tap Connect.
• To leave the network that has been connected, tap Forget. For example, users can
choose to forget a network that they won't use again.
• To close the network information screen, tap Cancel.
Configuring Wi-Fi network proxy servers
If users need to connect to network resources through a proxy server, they need to configure
a proxy server for each Wi-Fi network added. By default, none of the Wi-Fi networks added
by users has done proxy server settings.
To Next Page
Loading...
Need help?
General