Chapter 7: Configuring Terminal
68
User Guide for ScanPal50 Series Terminal
Connecting to a virtual private network
The terminal supports connection to virtual private networks (VPNs). This section describes
how to add and connect to VPNs. To configure a VPN, users must consult your network
administrator. Users can view and change VPN settings in the Application Settings.
Note: Before accessing VPN, users need to set a lock screen password.
Add VPN
Before connecting to a VPN, users must first add the relevant information of the VPN.
1. Enter Application Settings screen.
2. Tap More under Wireless and Networks.
3. Tap VPN.
4. Tap Adding +.
5. Input the VPN information.
6. Tap Save, and VPN name will be displayed in the list.
Connect to VPN
1. Enter Application Settings screen.
2. Tap More under Wireless and Network.
3. Tap VPN.
4. Tap the VPN name in the list, and enter the certificate information based on the tips.
5. Tap Connect. The terminal gets connected to the VPN, and the status icons and
notification will be displayed. To disconnect from the VPN, tap the notification.
Edit VPN information
1. Enter Application Settings screen.
2. Tap More under Wireless and Network.
3. Tap VPN.
4. Long press the name of the VPN to be edited and select Editing Networks from the
list.
5. Edit VPN information based on your needs.
To Next Page
Loading...
Need help?
General