Chapter 7: Configuring Terminal
User Guide for ScanPal50 Series Terminal
65
Network communication
Users can connect the terminal to wireless and wired networks. Users can get the terminal
connected via the following ways:
• 802.11 radios
• Bluetooth
• USB
Connecting to Wi-Fi networks
When communicating through wireless networks, ScanPal EDA50K-X transfer data
through 802.11 radios. Before connecting to a Wi-Fi network, users need to know the
Security Protocol of the network and the certificates it required. Usually, 802.11 radio is
disabled by default.
1. Enter Settings>Wi-Fi.
2. When the WLAN switch turns blue, tapping the WLAN bar will display the detected
network list.
To Next Page
Loading...
Need help?
General