Honeywell ESSER IQ8Control M User Manual

Fire Alarm Control Panel IQ8Control C / M
126 FB 798951.10.GB0 / 04.15
15 IQ8Wireless
The IQ8Wireless wireless components enable wireless connection of fire detectors and/or acoustic and optical
alarm signalling units and can be used either as part of the FACP loop or as a stand-alone wireless control facility
in fire alarm control systems with conventional detector zones.
3
0
-
3
0
0
m
*
IQ
8C
ontr
ol
IQ
8
C
on
tr
ol
805595.10
max. 32
2
0
-
20
0
m*
max. 10
805594.10
9 ... 30 V DC
Fig. 106: IQ8Wireless devices (schematic view)
System requirements
 Programming software tools 8000 from V1.15
 System software from version V3.04 R001 onwards is required for connection to the loop as a databus
subscriber.
Accessories
Part No. Description
805593.10
IQ8Wireless detector base for automatic Fire detectors series IQ8Quad
(without integrated alarm device)
805594.10 IQ8Wireless gateway
805595.10 IQ8Wireless transponder for wall mounting
805597 4 Lithium batteries (type AA / 3,6 V) for power supply
805601.10 IQ8Wireless universal Interface (red), without cover
805602.10 IQ8Wireless universal Interface (white), without cover
805603 IQ8Wireless Mounting frame for Alarm device IQ8Alarm (red + white)
805604 IQ8Wireless Mounting frame for automatic Fire detectors IQ8Quad (white)
805605 Cover for IQ8Wireless Interface 805601 und 805602 (red + white)
For the operation of the intelligent Fire alarm detectors series IQ8Quad with integrated alarm device
use components (Part No. 805602.10 and 805604).
For additional information about the IQ8Wireless devices refer to the technical manual or visit the Homepage
www.esser-systems.com.

Honeywell ESSER IQ8Control M Specifications

General

Brand	Honeywell
Model	ESSER IQ8Control M
Category	Control Panel
Language	English