Honeywell ESSER IQ8Control M User Manual

Fire Alarm Control Panel IQ8Control C / M
24 FB 798951.10.GB0 / 04.15
5.3 Fitting the panel to the mounting surface
4 x
 Chose the place for mounting the panel as
specified in the project documentation.
 Observe the installation environment
specifications.
 Take note of the position of the cables and
corresponding cable entry points
 Hold the rear housing panel horizontally
(align using a spirit level) against the
mounting surface and mark the four
mounting holes.
Fig. 15: Fitting the panel to the mounting surface
Take note of any cables that are routed over the top of the surface/plaster (TS) or behind the
surface/plaster (US) before attaching the housing!

Honeywell ESSER IQ8Control M Specifications

General

Brand	Honeywell
Model	ESSER IQ8Control M
Category	Control Panel
Language	English