Honeywell ESSER IQ8Control M User Manual

Fire Alarm Control Panel IQ8Control C / M
88 FB 798951.10.GB0 / 04.15
1
2
3
4
5
6
7
8
not used
Tx -
Rx +
Tx +
Rx -
transmitt
receive
transmitt
Rx -
Tx +
Rx +
Tx -
external device
not used
not used
not used
receive
Fig. 79: Assignment for terminal card TTY module
If solder jumper BR3 is closed on the module, TTY interface may not be used.
Max. cable length for TTY is 1000 m, recommended cable: I-Y (St) Y x 2 x 0.8 mm
Observe permitted torque (max. 0.4 Nm) of the terminals!
8.3.2 Technical data interface modules
RS 232/TTY module (Part No. 784842)
Operating voltage : Internal via the power supply module, + 5 V DC / +12 V DC
Quiescent current : TTY-mode approx. 55 mA @ 12 V DC
RS232-mode approx. 35 mA @ 12 V DC
Interface type : TTY (20mA) or RS232
selectable in panels date configuration
Transmission speed : max. 19200 bit/s
Interface cable length : TTY
 max. 1000 m
RS 232
 max. 15 m

Honeywell ESSER IQ8Control M Specifications

General

Brand	Honeywell
Model	ESSER IQ8Control M
Category	Control Panel
Language	English