Honeywell ESSER IQ8Control M User Manual

Fire Alarm Control Panel IQ8Control C / M
FB 798951.10.GB0 / 04.15 97
The function menu of the installer level appears with four menu points:
The function menu of the installer level with its four menu points appears after the successful entry of the code:
Installer
1 Primary loop functions
2 Detector simulation
3 Control simulation
4 Printer function
Escape Event mem. Select
Fig. 84: Function menu
Pressing the
Escape function key exits the installer level to the status display.
1. Primary loop function

Switching on/resetting a primary loop
 Switching off a primary loop
 Test operation of an loop
 Detector replacement in an loop
2. Detector simulation

Alarm simulation of a fire detector
 Pre-alarm simulation of a fire detector
 Trouble simulation of a fire detector
 End test (simulation)
3. Control simulation

Activate simulation of a control (relay/open collector output)
 Trouble simulation of a control (relay/open collector output)
 End test (simulation)
4. Printer functions

Switching off the internal or external protocol printer
 Switching on the internal or external protocol printer
 Print out the event memory / repeat printout
 Display event memory

Honeywell ESSER IQ8Control M Specifications

General

Brand	Honeywell
Model	ESSER IQ8Control M
Category	Control Panel
Language	English