18
Time/Date (User Type 3.6)
Purpose
The Time/Date option allows the user to modify both the time (hours/
minutes) and the date (day/month/year).
Selecting Time/Date
Enter the QUICK MENU. Press key 7 followed by the ent key. Once
the Time/Date option has been selected, the time or date can be se-
lected by pressing the A> or <B key.
Changing Time
To change the time press the A> key. The display prompts for a New
Time in hours and minutes (HH:MM). When the new time is entered,
the display immediately returns to the time or date selection screen.
The system does not accept invalid times (greater than 23 hours, greater
than 59 minutes). Pressing the esc key aborts the entry.
Changing Date
To change the date press the < B The display prompts for a New Date
in days, months and years (DD/MM/YY). When the new date is en-
tered, the display momentarily shows the day of the week, before re-
turning to the time or date selection screen. The system does not ac-
cept invalid dates (e.g. 32/13/99). Pressing the esc key aborts the en-
try.
Advance and Retard
It is possible to advance and retard the time to compensate for any
variations in clock speed. Press the # key when in the time/date mode
to select the clock speed adjustment. The range is 0 to 120 seconds per
week. Pressing the * key will retard the time.
0 = OMIT ZONES
[ent] to Select
7
7 = TIME/DATE
[ent] to Select
PIN + ent
ent
15:25 01/03/05
A=TIME B=DATE
NEW TIME
--:-- HH:MM
enter time
enter date
NEW DATE
--/--/-- DD/MM/YY
A> <B
15:25 01/03/05
A=TIME B=Date
Adjustment/week
010 (0-120) secs
#
(press the
*
key to retard time)
*
To Next Page
Loading...
Need help?
General
