Honeywell H4W2PER3 User Manual

Performance Series IP Camera Software Configuration Guide
62
Figure 8-3 Path
Table 8-1 Path Configurations
Parameter Function
Event Type Select Scheduled, Motion Detection, or Alarm.
Local Select to save files to the microSD card
FTP Select to save files to the FTP server.
NAS Select to save files to the NAS disk.
Local
If the camera has a microSD card installed, the Local tab displays the microSD card details.
Note
This function is not supported by the following models:
HPW2P1/HBW2PER1.
Figure 8-4 Local Storage
You can set up the installed microSD card for read-only, read-and-write, or hot swap
operation by clicking the corresponding button.
• Read Only: Data on card can be displayed but not modified.
• Read & Write: Data on card can be displayed and modified.
• Hot Swap: Card can be inserted or removed without turning off the camera.

Honeywell H4W2PER3 Specifications

General

Brand	Honeywell
Model	H4W2PER3
Category	Security Camera
Language	English