Honeywell H4W4PRV3 User Manual

Configuring Camera Settings
35
DDNS
Manually Configuring the DDNS
Figure 5-13 DDNS Configuration Interface
To set the DDNS, go to the corresponding service website to apply a domain name, and then access the
system through that domain. This works even if your IP address has changed.
Table 5-10 DDNS Configurations
Parameter Function
Server Type
To enable DDNS, select the check box and choose a server from the drop-down
list.
Server Address The DDNS server IP address.
Domain Name Your self-defined domain name.
Username The user name you enter to log into the server.
Password The password you enter to log into the server.
Update Period
The frequency at which the camera regularly sends out the life signal (heartbeat)
to the server. You can set the interval value between the camera and the DDNS
server here.
Using Honeywell DDNS to Configure DDNS
Figure 5-14 Using Honeywell DDNS to Configure DDNS
Set the DDNS to connect the Honeywell DDNS server so that you can access the system through the
servers.

Honeywell H4W4PRV3 Specifications

General

Brand	Honeywell
Model	H4W4PRV3
Category	IP Camera
Language	English