Performance Series IP Camera Software Configuration Guide
42
QoS
Quality of Service (QoS) is a network security mechanism. It fixes problems with network delays and jams.
For network service, the quality of service includes the transmission bandwidth, delay, and packet loss,
for example. Through QoS, you can guarantee the transmission bandwidth, reduce the delay, reduce the
loss of data packets, and enhance the transmission quality with packet prioritization.
Figure 5-22 QoS Configuration Interface
Table 5-16 QoS Configurations
Parameter Function
Realtime Monitor
This value ranges from 0 to 63. The router or the switcher can provide
different service for different packets.
Command
This value ranges from 0 to 63. The router or the switcher can provide
different service for different packets.
Certificate
The camera uses HTTPS, a secure communication protocol that verifies the identities of visited websites
and servers and encrypts data exchanged between the client and the server. When you log in to the
camera’s web client for the first time, some browsers may display a warning that the connection is not
private/secure. To access the web client, you must install a Honeywell-signed security certificate.
The installation of the security certificate involves three sets of steps:
• Logging in (and, if applicable, configuring a security exception)
• Downloading the root certificate
• Installing the root certificate
For more details, refer to Performance Series IP Cameras Certification Installation Guide.
Figure 5-23 Certificate Configuration Interface
To Next Page
Loading...
Need help?
General