Honeywell H4W4PRV3 User Manual

Configuring Camera Settings
39
3. Click Details, and then click to select Internet Gateway Device Discovery and Control client
and UPnP User Interface.
4. Click OK to begin the installation.
SNMP
You can configure cameras using SNMP (Simple Network Management Protcol).
Figure 5-18 SNMP Configuration Interface
Table 5-13 SNMP Configurations
Parameter Function
SNMP Version When SNMP v1 is selected, the device can only process SNMP v1
information.
When SNMP v2 is selected, the device can only process SNMP v2
information.
When SNMP v3 is selected, you can set user name, password and
authentication type.
The server needs to set the corresponding management system account
when you want to access the device. For security reasons, the SNMP v1 and
SNMP v2 are both null.
SNMP Port This is the listening port of the proxy applications in the device. The default
value is 161. The value ranges from 1 to 65535.
Read Community The community string will read all the objects the SNMP supported in the
specified name. The default setup is public.
Write Community The community string will read/write/access all the objects the SNMP
supported in the specified name. The default setup is write.
Trap Address The destination address of the trap information from the proxy program of
the device.

Honeywell H4W4PRV3 Specifications

General

Brand	Honeywell
Model	H4W4PRV3
Category	IP Camera
Language	English