Performance Series IP Camera Software Configuration Guide
44
Figure 5-25 Holiday Schedule
Destination
Path
On the Path tab, you can assign where recorded video files or snapshots will be saved. Depending on
your camera model, you can save recorded video or snapshots to a microSD card, an FTP server, and/or
an NAS disk.
You can also set up the system to save recorded video files and snapshots according to event type
(Scheduled, Motion Detect, Alarm), corresponding to the three recording modes in the Schedule
interface (General, Motion, Alarm).
Figure 5-26 Path Configuration Interface
Table 5-17 Path Configurations
Parameter Function
Event Type Select Scheduled, Motion Detect, or Alarm.
Local Select to save files to the microSD card
FTP Select to save files to the FTP server.
NAS Select to save files to the NAS disk.
To Next Page
Loading...
Need help?
General