Performance Series IP Camera Software Configuration Guide
58
Record If Record is enabled, a camera tampering event can activate recording.
Record Delay
The system will wait for the specified time before it begins recording. Select from
10s to 300s.
Send Email When enabled, the system sends an email alert when an alarm occurs.
Snapshot
When enabled, the system attaches a snapshot to an email alert when an alarm
occurs.
Figure 6-5 Tampering Working Period Configuration Interface
Configuring System Events Settings
System events include No SD Card, Capacity Warning, SD Card Error, Disconnection, IP Conflict, and
Unauthorized Access.
Note
Only applicable to cameras with microSD cards
(H2W2PRV3/H2W4PRV3/HBW2PR2/HBW4PR2/HEW2PR2/HEW4PR2/
H4W2PRV2/H4W4PRV2).
To Next Page
Loading...
Need help?
General